Quick answer#

Use the GemLightbox Pro with the GemIQ Mobile App to capture professional jewelry photos and videos. Place your jewelry inside the lightbox, connect your phone, and follow the steps below to shoot.

Before you start#

  • GemLightbox Pro is fully assembled and powered on

  • GemIQ Movile App is installed on your phone

  • Your phone is connected to the GemLightbox Pro

  • Jewelry is clean and free of dust and fingerprints

Steps#

Capture a Photo#

  1. Power on your GemLightbox Pro.

  2. Open the GemIQ Mobile App on your phone.

  3. Connect your phone to the GemLightbox Pro when prompted.

  4. Place your jewelry piece inside the lightbox on the shooting surface.

  5. Close the lightbox lid fully to block ambient light.

  6. In the app, select Photo mode.

  7. Frame your shot using the live preview.

  8. Adjust lighting and camera settings as needed.

  9. Tap the capture button to take your photo.

  10. Review your photo in the app gallery and save or retake if needed.

Capture a Video#

  1. Follow steps 1–5 above.

  2. In the app, select Video mode.

  3. Frame your shot using the live preview.

  4. Tap the record button to start recording.

  5. Tap again to stop recording.

  6. Review your video in the app gallery and save or retake if needed.

Capture a 360° Video (with Turntable)#

  1. Place your jewelry on the turntable inside the lightbox.

  2. In the app, select 360° mode.

  3. Start the turntable rotation.

  4. Tap record to capture a full rotation.

  5. Stop recording, then review your clip.

Expected result#

Your photo or video is saved to your device or GemIQ Mobile App's media, ready to export, share, or edit.

If this does not work#

  • App won't connect: Ensure Bluetooth is enabled and your phone is within range. Close and reopen the app, then try reconnecting.

  • Image appears dark or overexposed: Adjust the lighting settings inside the app.

  • Video is shaky or blurry: Ensure the turntable is seated correctly and the lightbox is on a stable, flat surface.

  • Photos are not saving: Check that your phone has sufficient storage and that GemIQ has permission to access your photo library.

  • Live preview is not showing: Force-close the app and relaunch. If the issue persists, restart the GemLightbox Pro.

Common mistakes#

  • Not cleaning jewelry before shooting — dust and fingerprints show clearly under professional lighting.

  • Leaving the lightbox lid open during capture — this lets ambient light in and affects image quality.

  • Using digital zoom instead of repositioning the jewelry — digital zoom reduces image sharpness.

  • Not reviewing shots before ending the session.