Quick Answer#

To connect your GemLightbox to GemIQ on an Android device, you must enable both the main location service in your phone's settings and location permission for the app. Android requires this for the app to discover nearby Bluetooth devices like your GemLightbox.

Before You Start#

  • You will need your Android smartphone or tablet.

  • Ensure GemIQ is installed from the Google Play Store.

  • Have your GemLightbox powered on and nearby.

Steps#

  1. Open your device's Settings app.

  2. Tap on Location. If you cannot find it on the main screen, use the search bar within Settings to search for "Location".

  3. Ensure the main Use location toggle at the top of the screen is turned On.

  4. On the same Location screen, tap on App permissions or App location permissions.

  5. Find and select GemIQ from the list of apps.

  6. Choose the permission setting Allow only while using the app. This allows the app to find your GemLightbox when it's open without constantly using your location.

Expected Result#

After enabling both device location and app-specific permission, you will be able to see and connect to your GemLightbox from the device list inside GemIQ.

If This Does Not Work#

  • Make sure Bluetooth is also enabled in your device's main settings.

  • Restart your Android device and your GemLightbox.

  • Open the Google Play Store to check for any available updates for GemIQ.

Common Mistakes#

  • Turning on device location but not app permission: Both must be enabled. The device's main location service must be on, and GemIQ must have permission to use it.

  • Denying the permission prompt: When first installed, GemIQ will ask for location permission. If you select "Don't allow", you will need to enable it manually in your settings later.

  • Misunderstanding the purpose: GemIQ uses location services for Bluetooth scanning only, as required by the Android operating system. It does not track your physical location.