Quick Answer

The GemLightbox Turntable connects to your GemLightbox via an included power cord and pairs to the GemHub over Bluetooth. Setup takes under two minutes. Once connected, you can capture 360° spin videos and photos directly from the app.

Before You Start

  • Make sure your GemLightbox is powered on and placed on a stable, flat surface.

  • Download and install the GemIQ Mobile App on your smartphone (iOS or Android).

  • Have the turntable power cord ready — it is included in the box.

  • Enable Bluetooth on your smartphone.

Steps

  1. Connect the Power
    Plug the white power cord into the socket on the side of the turntable. Connect the other end to the power socket inside the GemLightbox.

  2. Position the Turntable
    Place the turntable inside the GemLightbox. Center it carefully so it can rotate freely without touching the walls.

  3. Power On the Turntable
    Press the black button on the side of the turntable to turn it on.

  4. Connect via Bluetooth
    Open the GemIQ. Tap Device, then select your turntable from the list to pair it.

  5. Start Capturing
    Your turntable is now ready. Use the GemIQ to control rotation and begin shooting 360° videos or photos.

Expected Result

The turntable rotates smoothly inside the GemLightbox. You can control it from GemIQ and capture consistent, professional 360° shots of your jewelry.