Learning CenterThis guide will walk you through setting up your Eclipse accessory for the GemLightbox Turntable. You'll be ready to capture stunning jewelry photos and videos on a pure black background in just a few minutes.
Step 01 · What you'll need
Make sure you have the Eclipse accessory. You will also need your existing GemLightbox and GemLightbox Turntable.
Step 02 · Hardware Setup
Before attaching the Eclipse, you'll need to power down your turntable and remove the standard white disc.
Step 03 · Hardware Setup
Place the GemLightbox Eclipse cover directly over the turntable base. It will lock into place magnetically.
Pro tip: If the Eclipse cover feels unstable, lift it and place it again to ensure it has properly seated on the turntable's magnets.
Step 04 · Software Setup
Open the GemIQ app on your smartphone or computer and connect to your GemLightbox. Ensure your turntable is powered back on for this step.
Step 05 · Software Setup
In the camera settings within the app, locate and toggle on the Eclipse filter. This step is essential to render the background as pure black.
Pro tip: Forgetting the filter is the most common mistake. If your background appears dark grey instead of pure black, double-check that this filter is enabled.
Step 06 · Final Touches
Use the sockets on the side of the Eclipse to gently lift the lid. Place your clean jewelry in the center of the surface, close the lid, and you're ready to shoot.
Pro tip: Any dust or fingerprints will be highly visible against the black background. Ensure your pieces are perfectly clean before shooting.
With the hardware and software configured, you're all set to begin capturing professional images and 360° videos of your jewelry against a perfectly black background.